一、混凝土测温仪是根据我国建筑行业施工特点和有关技术规范研制的化测温仪器，可直观、准确、快捷地数字显示被测温度，可靠性好、使用范围广、宽温操作环境、体积小重量轻、操作简单、携带方便、适合工地
上海荣计达jdc-2混凝土测温仪厂家 产品详情
一、混凝土测温仪是根据我国建筑行业施工特点和有关技术规范研制的 化测温仪器，可直观、准确、快捷地数字显示被测温度，可靠性好、使用范围广、宽温操作环境、体积小重量轻、操作简单、携带方便、适合工地。混凝土测温仪主要用于建筑、建材、水利、电力、冶金、石化、港口、道桥、市政等基本建设工程。测温线规格：0.5m、1m、1.5m、2m、2.5m、3m、3.5m、4m、4.5m、5m，其他规格可定做
first, the concrete thermometer is a temperature measuring instrument developed in accordance with the construction characteristics and related technical specifications of china's construction industry. it can intuitively, accurately and quickly display the measured temperature digitally. environment, small size, light weight, simple operation, easy to carry, suitable for construction site. concrete thermometers are mainly used in construction projects such as construction, building materials, water conservancy, electric power, metallurgy, petrochemicals, ports, roads and bridges, and municipal administration. temperature measuring line specifications: 0.5m, 1m, 1.5m, 2m, 2.5m, 3m, 3.5m, 4m, 4.5m, 5m, other specifications can be customized
二、混凝土测温仪适用范围：
适用于各类建筑工程的现场施工测温，与测温探头配合可测材料和熟料温度，如：气体、液体、流体、拌合物和颗粒状材料；与预埋式测温线配合可测冬期施工混凝土和大体积混凝土内部温度。
application scope of concrete thermometer:
it is suitable for on-site construction temperature measurement of various construction projects. it can measure the temperature of materials and clinker with temperature measurement probes, such as: gas, liquid, fluid, mixture and granular materials; it can be used with embedded temperature measurement lines. measure the internal temperature of winter construction concrete and mass concrete.
三、混凝土测温仪技术参数：
★测温范围：-30℃～+130℃
★测温误差：≤ 0.5℃(与测温探头配合)；≤1.0°c(与测温线配合)
★分辨率：0.1℃
★操作环境温度:-20℃～+50℃
★显示方式：三位半宽温型液晶显示屏
★电源，9v积层电池一枚
★重量：200g
★主机体积：135mmx72mmx32mm
third, the technical parameters of concrete thermometer:
★ temperature measurement range: -30 ℃ ～ + 130 ℃
★ temperature measurement error: ≤ 0.5 ℃ (cooperate with temperature probe); ≤ 1.0 ° c (cooperate with temperature line)
★ resolution: 0.1 ℃
★ operating ambient temperature: -20 ℃ ～ + 50 ℃
★ display mode: three half-width temperature lcd
★ power supply, one 9v laminated battery
★ weight: 200g
★ host volume: 135mmx72mmx32mm
四、混凝土测温仪使用说明：
★用主机与测温探头测量材料温度
将测温探头的插头插入主机插座，按下电源开关，将测温探头金属杆插入被测物中，插入深度不少于其长度的1/2，两分钟左右在主机上读取温度数据。在测量拌合物 温度时，为避免测温探头与拌合物中的硬物过度撞击而影响使用寿命，可先用金属棍在拌合物中预留孔，再将测温探头插入孔中测温。每次用后应将测温探头擦拭干净。
★用主机与测温线测量大体积混凝土温度
施工测温方案确定后，根据测温点数量和深度选用长度规格合适的测温线，例如：实际测温点深 0.2m ～ 0.3m ，可选用规格为 0.5m 的测温线；实际测温点深 2.5m ～ 2.8m ，可选用规格为 3m 的测温线，以次类推。预埋时可用钢筋等杆件作支承物，将测温线按照纵向测温点距离绑在支承物上，温度传感器与支承物之间应做隔热处理。在浇筑混凝土时，将绑好测温线的支承物植入混凝土中，温度传感器处于测温点位置，插头留在混凝土外面并用塑料袋罩好，避免潮湿，保持清洁。为便于操作，留在外面的导线长度应大于 20cm 。测温时，按下主机电源开关，将测温线插头插入主机插座中，主机显示屏上即可显示相应测温点的温度。
★用主机与测温线测量冬期施工混凝土温度
在浇筑混凝土时，按冬期施工测温方案预留测温孔，在每个孔内放置一支测温线，测温线的插头留在孔外并用塑料袋罩好，避免潮湿，保持清洁。测温时，按下主机电源开关，将测温线插头插入主机插座中，主机显示屏上即可显示相应测温点的温度。每阶段测温结束后将测温线收存好，以备下次再用。也可将测温线埋入混凝土中一次性使用，具体作法见使用方法“ 2 ”。
★夜间测温读数照明功能的使用
在夜间或黑暗环境下使用时，按下主机照明开关，液晶显示屏可发出淡绿色的背景光，使读数清晰醒目。
fourth, the use of concrete thermometer:
★ measure material temperature with host and temperature probe
insert the plug of the temperature probe into the socket of the host, press the power switch, insert the metal rod of the temperature probe into the test object, and insert the depth of not less than 1/2 of its length, and read the temperature data on the host in about two minutes. when measuring the temperature of the mixture, in order to avoid the impact of the temperature probe and the hard objects in the mixture to affect the service life, you can use a metal stick to reserve a hole in the mixture before inserting the temperature probe into the hole temperature measurement. wipe the temperature probe clean after each use.
★ measure the temperature of large volume concrete with host and temperature measurement line
after the construction temperature measurement plan is determined, select a temperature measurement line with an appropriate length according to the number and depth of the temperature measurement points, for example, the actual temperature measurement point depth is 0.2m to 0.3m, and a temperature measurement line with a specification of 0.5m can be selected; actual temperature measurement the point depth is 2.5m ～ 2.8m, and a temperature measuring line with a specification of 3m can be selected, and so on. during embedding, rods and other rods can be used as supports, and the temperature measurement line is tied to the support according to the distance of the longitudinal temperature measurement point. the temperature sensor and the support should be insulated. when pouring concrete, the support bound with the temperature measurement line is implanted into the concrete, the temperature sensor is at the temperature measurement point, the plug is left outside the concrete and covered with a plastic bag to avoid moisture and keep it clean. for ease of operation, the length of the wires left outside should be greater than 20cm. when measuring the temperature, press the power switch of the host and insert the temperature measurement line plug into the socket of the host, and the temperature of the corresponding temperature measurement point can be displayed on the display of the host. zh
★ using the host and the temperature measurement line to measure the concrete temperature in winter construction
时 when pouring concrete, reserve temperature measurement holes according to the winter construction temperature measurement plan, place a temperature measurement line in each hole, and leave the plug of the temperature measurement line outside the hole and cover it with a plastic bag to avoid moisture and keep it clean. when measuring the temperature, press the power switch of the host and insert the temperature measurement line plug into the socket of the host, and the temperature of the corresponding temperature measurement point can be displayed on the display of the host. after each phase of temperature measurement, store the temperature measurement line for next time. the temperature measurement line can also be buried in the concrete for one-time use. for the specific method, see the usage method 2. zh
★ using the temperature reading function at night
使用 when using at night or in a dark environment, press the main unit's lighting switch, and the lcd screen can emit a light green background light to make the readings clear and eye-catching.
五、混凝土测温仪构成和功能：
主机可分别与测温探头或测温线连接构成测温系统，可根据现场需要和测温点数量灵活配置。
★主机
主机为便携式仪表，设有电源开关、照明开关、插座和液晶显示屏，可数字显示被测温度值，并有夜间测温读数照明功能。为防尘防潮防磕碰，采用密封性能良好的薄膜轻触开关和背带式仪器套，也可打开主机后面的支架，置于桌面上使用。
★测温探头
测温探头由插头、导线、手柄和外径为φ5mmx220mm的金属管制成，管内前端封装温度传感器，适宜测量材料和熟料温度。
★测温线
预埋式测温线由插头、导线和温度传感器制成，适宜测量混凝土内部温度，每支测温线可测一点温度，在施工中可任意布置测温点。为便于分层测温，每支测温线的插头都贴有相应长度规格的标签。
fifth, the composition and function of concrete thermometer:
the host can be connected to a temperature measuring probe or a temperature measuring line to form a temperature measuring system, which can be flexibly configured according to the needs of the site and the number of temperature measuring points. zh
★ host
the host computer is a portable instrument with a power switch, lighting switch, socket and lcd screen, which can display the measured temperature value digitally, and has a lighting function for temperature reading at night. in order to prevent dust, moisture, and bumps, a film tact switch with good sealing performance and a strap-type instrument cover can be used. the bracket at the back of the host can also be opened and placed on a desktop. zh
★ temperature probe
温 the temperature measuring probe is made of a plug, a wire, a handle and a metal pipe with an outer diameter of φ5mmx220mm. a temperature sensor is enclosed at the front end of the pipe, which is suitable for measuring the temperature of materials and clinker. zh
★ temperature line
the embedded temperature measuring line is made of plug, wire and temperature sensor, which is suitable for measuring the internal temperature of concrete. each temperature measuring line can measure a little temperature, and the temperature measuring points can be arranged arbitrarily during the construction. in order to facilitate layered temperature measurement, the plug of each temperature measurement line is labeled with a corresponding length specification.
六、混凝土测温仪电池的更换：
当主机显示屏左上角出现电池符号或不能正常开机时，一般为电池电压不足所致，需换新电池。方法如下：将主机后面的电池仓盖向下推动，打开电池仓将旧电池取出，扣好新电池，然后将电池仓盖恢复原位置。
6. replacement of concrete thermometer battery:
when the battery symbol appears in the upper left corner of the host computer's display or it cannot be turned on normally, it is generally caused by insufficient battery voltage, and a new battery needs to be replaced. the method is as follows: push down the battery compartment cover on the back of the host, open the battery compartment to remove the old battery, fasten the new battery, and then restore the battery compartment cover to its original position.
七、混凝土测温仪注意事项：
★主机未接测温探头或测温线时显示屏上显示“-1”为准备工作状态。
★在操作中a用力过猛，将插头插入或拔出主机插座时，应持稳插头。
★插头和主机插座应避免潮湿，保持清洁。如不慎进水受潮，请擦净晾干后再使用，以免测温结果失准。
★仪器使用完毕应及时关机，长期不用时应将电池取出以免损坏仪器。
★不要自行打开主机后盖，需要检修或校准时，请送回生产厂或代理处。
6. replacement of concrete thermometer battery:
when the battery symbol appears in the upper left corner of the host computer's display or it cannot be turned on normally, it is generally caused by insufficient battery voltage, and a new battery needs to be replaced. the method is as follows: push down the battery compartment cover on the back of the host, open the battery compartment to remove the old battery, fasten the new battery, and then restore the battery compartment cover to its original position.
八、混凝土测温仪附件：
★使用说明书 1 份
★产品检验合格证 1 份
★质量保证书 1 份
★仪器套 1 件
★电池 1 枚
eight, concrete thermometer accessories:
★ 1 instruction manual
★ 1 product inspection certificate
★ 1 quality assurance certificate
1 instrument set
★ 1 battery